|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Hank Dozier
Email: [email protected]
Date: March 10, 2002
Steve...Looking at my references, the bearing diameters and bearings look to be the same. The one thing not listed seems to be the rods, so my guess is (others help us out here) that a 56 Fury 303 or 57 318 crank is a fit. You would need the appropriate rods and pistons to achieve the displacement. One thing to watch for might be the valves could be different sizes between the 277/301 and the 303/318. Especially for the FURY. I know the cam specs are different. It could be ultimately cheaper to get a pre-62 318 Poly (or the 59 DODGE 326 Poly) and use that as your rebuid unit, and just swap.
