|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Hank Dozier
Email: [email protected]
Remote Name: 192.75.238.204
Date: April 30, 2002
I am making the assumption here that you are referring to the blocking of the bypass, as the other alteration is pretty easy. I agree this NOT the thing to do with a engine in the car. This is definitely an engine rebuild opportunity. HOWEVER, if the hole diameter is the correct size for a welch plug (thisdiameter on an "A" block is unknown to me), one could simply tap a welch plug, like used in rocker arm shaft ends, into the hole, and avoid drilling/tapping. This would work with only the oil pan and rear main cap removal.
